• iSpiider - robe-ispiider_1.png
  • iSpiider - robe-ispiider_2.png
  • iSpiider - robe-ispiider_3.png
  • iSpiider - robe-ispiider_4.png
  • iSpiider - robe-ispiider_5.png

iSpiider

Code: ROB 10071351
ROBE Lighting

Ideally suited for festivals, concerts and outdoor events, or any scenario needing to deal with inclement or unpredictable weather, the iSpiider® is a bright, high-performance rated WashBeam luminaire, retaining all the favourite features of its phenomenally successful indoor relative, the Spiider®.

Designed, developed, and manufactured, to be sealed against water and particle ingress, thereby strictly adhering to their IP65 rating, you can be confident of both its protection and performance.

Their aluminium housing gives a dust-free environment for the optics, eliminating the need for frequent cleaning and routine maintenance.

By including NFC (Near-Field Communication) technology, you can access setup, diagnostic and performance features, even when the fixture is not powered, directly from your mobile device using the Robe Com app.

iSpiider® uses the same 18 x 40-Watt, and 1 x 60-Watt LED source as the original, with the identical 12.5:1 zoom optical system, giving the same, tight 4° Beam to wide 50° Wash.

The unique Robe patented MCFE™ - Multi-Coloured Flower Effect, driven by the center 60W RGBW LED multichip, produces sharp, multicoloured spikes of light, rotating in both directions at variable speed, adding visual impact to any show.

All control protocols are present, with dynamic video effects achieved by mapping individual pixels, controlled by DMX control desks, media servers via sACN with internal HTP merging, or Kling-Net.

Designed to be used indoors or out, we make fixture swap with the original Spiider® easy, as the DMX control channels, operating speeds, and feature set of both luminaires are identical.


Category: beam , wash , IP devices


  • Share:  

SOURCE

  • Light Source Type: 1x 60W RGBW and 18x 40W RGBW LED multichips
  • LED Life Expectancy: min. 50 000 hours
  • Typical Lumen Maintenance: 70% @ 20 000 hours

OPTICAL SYSTEM

  • Robe’s proprietary optical design
  • High - efficiency zoom optical system, ratio 12,5:1
  • Zoom range: 4° - 50°
  • Fixture total lumen output: 11.000 lm
  • Light output: 50.100 lx @ 5 m

DYNAMIC EFFECTS

  • Colour mixing mode RGBW or CMY
  • Individual control of each RGBW pixel
  • White light: Variable CCT 2.700K - 8.000K
  • DataSwatch™ filters: pre-programmed 66 colours and tones including most used whites 2.700K, 3.200K, 4.200K, 5.600K and 8.000K
  • Tungsten lamp effect: 750W, 1.000W, 1.200W, 2.000W, 2.500W lamp emulation for whites from 2.700K to 4.200K (red shift and thermal delay)
  • Colour rainbow effect with variable speed
  • Pre-programmed pixel effects with colour, dimming and strobe chases, waves and pulses at variable speed and direction
  • Innovative Flower Effect: rotating in both directions at variable speed (Patented)
  • Electronic strobe effect with variable speed up to 20 Hz, pre-programmed random strobe & pulse effects
  • High resolution electronic dimming: 0 - 100%
  • L3™ - (Low Light Linearity) Imperceptible 18 bit dimming for ultra smooth fade to black

CONTROL AND PROGRAMMING

  • Setting & Addressing: ROBE Navigation System 2 (RNS2)
  • Display: QVGA Robe touch screen with battery backup, gravitation sensor for auto screen positioning, operation memory service log with RTC, stand-alone operation with 3 editable programs (each up to 100 steps), built-in analyser for easy fault finding
  • Protocols: USITT DMX-512, RDM, Art-Net, MA Net, MA Net2, sACN, Kling-Net
  • Wireless CRMX™ technology from Lumen Radio (on request)
  • DMX Protocol modes: 10
  • Control channels: 49, 27, 33, 90, 27, 47, 91, 110, 104, 123
  • Pan/Tilt resolution: 16 bit
  • R,G,B,W colour mixing: 8 or 16 bit (internal 18 bit)
  • Zoom: 8 bit
  • Dimmer: 8 or 16 bit (internal 18 bit)

MOVEMENT

  • Pan movement: 540°
  • Tilt movement: 220°
  • Movement control: Standard and Speed
  • Controllable speed of Pan/Tilt movement
  • EMS™: Electronic Motion Stabilizer system for Pan & Tilt reducing beam deviation caused by truss movement or vibration (Patent pending)
  • Automatic Pan/Tilt position correction

THERMAL SPECIFICATION

  • Maximum ambient temperature: 45 °C (113 °F)
  • Maximum surface temperature: 75 °C (167 °F)
  • Minimal operating temperature: - 10°C (23 °F)

ELECTRICAL SPECIFICATIONS AND CONNECTIONS

  • Power supply: Electronic auto-ranging
  • Input voltage range: 100-240 V, 50/60 Hz
  • Power consumption: max. 600 W
  • Power in connector: Neutric powerCON TRUE1
  • DMX and RDM data in/out: Locking 5-pin XLR
  • Ethernet port in/out: RJ45
  • Embeded Ethernet switch 10/100 Mbps: 1 x in / 1 x out

APPROVALS

  • CE Compliant
  • cETLus Compliant (pending)

MECHANICAL SPECIFICATION

  • Height:  595 mm
  • Width:   450 mm
  • Depth:   277 mm
  • Weight: 24,9kg

RIGGING

  • Mounting positions: Horizontally or vertically
  • Universal operating position
  • Mounting points: 2 pairs of 1/4-turn locking points
  • 2x Omega adaptors with 1/4-turn quick locks
  • Safety cable attachment point
  • Tilt transport lock

katalogi prolight

Technical and marketing documents ROBE iSpiider

CHECK
This website uses cookies to collect data and to help provide you with the best experience we can. Cookies enable a personalized experience for visitors. To avoid cookies, you can change the security settings in your web browser. If you continue to browse our website, you agree to our use of cookies. For more information go to our Privacy Policy. I understand