• CRYO-FOG - cryo-frontoh.jpg

CRYO-FOG

Code: 400
Look Solutions

CRYO-FOG low fog generator

The CRYO-FOG is a powerful low fog machine. A fog generator, a fan and a cooling chamber built into a compact flightcase (67 x 51 x 30 cm) with space next to the fog generator to held a 5ltr can of fluid. The CRYO-FOG is a powerful 2300 Watt low fog machine. Liquid CO 2 is used to cool down the fog of the inbuilt low temperature fog generator. Therefore the machine produce thick low fog which distributes evenly. The machine is powerful enough to fill even big stages with low fog within a short time. The liquid CO 2 is delivered from a low pressure tank (20 - 24 Bar), which is connected to the machine via a hose. The intelligent technology ensures that the fogging process will not start before the cooling chamber has reached the right temperature. As a result, no "warm" fog - which will go upwards - can escape from the machine. The Cryo-Fog benefits from its compact size, the low weight, the powerful output, the low noise and the easy operation. The CRYO-FOG benefits from its compact size, the low weight, the powerful output, the low noise and the easy operation.

Features

DMX 512 as standard

The CRYO-FOG can be controlled via DMX 512. The connection is done with 5pin-XLR-plugs. The DMX start address can be adjusted and saved via the control panel. The machine uses three channels on the desk. So, the pump, the fan and also the CO 2-valve can be adjusted separately. If the CRYO-FOG is controlled vie DMX 512, the machine can also be used as a "normal" fog generator. The machine can also be controlled with analog (0 - 10 V) via a lighting desk or via XLR-remote (option). This connection is done with 3pin-XLR-plugs. The fogging process starts automatically as soon as the cooling chamber has reached the right temperature.
A stand-alone-mode is also possible. The adjustment of the pump is done directly at the machine. The fan runs automatically. A short press at the start button makes the machine run and the fogging process start as soon as the cooling chamber has reached the right temperature.

Control panel

The control panel with LED-display, simple symbols allow for easy operation. It also protects the control buttons against dirt.

Finest adjustments of the output

Digital technology makes fine adjustment of the pump possible. In steps of 1% the output can be adjusted from 0 - 99%. Thus, any desired effect from a tiny fog-cloud to the thickest fog can be produced. This enables the CRYO-FOG to be used in both small and large locations.


Category: Heavy fog


  • Share:  

Advantages

 

  • Fog generator, fan and cooling system in a compact case
  • DMX as standard, analogue (0 - 10V) and stand-alone-Mode
  • In the DMX-Mode the pump, the fan and the CO 2-valve can be adjusted separately
  • Can be used as a "normal" fog generator in DMX-Mode
  • Low fogging process starts automatically only if the cooling chamber has reached the right temperature
  • Easy handling
  • Powerful output
  • Fogging output adjustable in steps of 1% from 0 - 99%
  • Continuous output
  • Easy bottle changing with quick-out connectors
  • Made in Germany

Technical data

 

Procedure

vaporizing fog machine
with cooling chamber

Total requirement
Power requirement

2300 Watt / 1700 Watt (120 V)
2000 Watt / 1400 Watt (120 V)

Voltage

230 V / 50 Hz
120 V / 60 Hz

Warm up time

approx. 7 min.

Fluid consumption
at 100% output
at . 50% output


100 ml/min.
. 40 ml/min.

Liquid CO 2 consumption
at max. output


2 kg/min.

Fluid tank capacity

5 l

Fog output

adjustable in 99 steps
Fogging time

continous output

Control

DMX 512
0 – 10 V analog
Stand-alone-Mode

Temperature control Microprocessor
Overheating protection

Heater block/thermostat
Pump/Thermal switch

Dimensions (L x W x H)

67 x 51 x 30 mm

Weight

approx. 28 kg

Accessories

 

  • XLR-Remote
This website uses cookies to collect data and to help provide you with the best experience we can. Cookies enable a personalized experience for visitors. To avoid cookies, you can change the security settings in your web browser. If you continue to browse our website, you agree to our use of cookies. For more information go to our Privacy Policy. I understand